For the interior cladding and benches of a sauna, LatvijasKoks.lv recommends three wood species. They are black alder, linden and aspen. All three are light hardwoods of similar density, so in a hot sauna they do not feel as hot to the touch as denser wood. The species differ in colour, price and how the wood behaves as it dries. In the catalogue, sauna cladding boards cost 18-22 EUR/m², while black alder bench boards cost 20 EUR/m².
Updated 21 November 2026.
Black alder, linden and aspen in one table
The table sums up the main properties of the three species and the catalogue prices. Density shows how many kilograms one cubic metre of wood weighs. In the table it is given for air-dry wood with 12-15 % moisture content (the amount of water in the wood).
| Property | Black alder | Linden | Aspen |
|---|---|---|---|
| Colour | light yellowish to reddish brown | white to yellowish | evenly yellowish white |
| Average density | 550 kg/m³ | 490 kg/m³ | 490 kg/m³ |
| Density range | 490-640 kg/m³ | 420-600 kg/m³ | 400-600 kg/m³ |
| When drying | rarely cracks or warps, may turn brown | may crack and stain | little warping and cracking |
| Cladding boards | 18 EUR/m² | 22 EUR/m² | 20 EUR/m² |
| Bench boards | 20 EUR/m² | price on quotation | price on quotation |
Prices are shown excluding VAT.
The properties are taken from the wood species descriptions of the German Timber Trade Federation (GD Holz), and the prices from the LatvijasKoks.lv catalogue.
Why light wood is chosen for a sauna
In a sauna, wood touches the skin in hot air. That is why thermal conductivity (how fast a material conducts heat) matters. The Wood Handbook of the US Department of Agriculture Forest Products Laboratory states that the thermal conductivity of wood increases with its density, moisture content and temperature.
The same handbook states that softwood structural lumber at 12 % moisture content has a thermal conductivity of 0.10-0.14 W/(m·K), concrete 0.9 W/(m·K) and steel 45 W/(m·K). The smaller the number, the more slowly the material conducts heat. The Finnish Sauna Society (Suomen Saunaseura) magazine Sauna notes that concrete benches in public saunas are covered with a wooden seat or cooled with water, otherwise nobody can sit on them.
The same article states that traditional bench woods such as aspen and alder are suitable because of their thermal conductivity, so they do not quickly burn the skin in the sauna heat. The average density of black alder is slightly higher than that of linden and aspen, but the density ranges of all three species overlap to a large extent. So the difference between these species is small, and the feeling of warmth also depends on the density and moisture of the individual board.

Black alder
GD Holz describes freshly sawn alder wood as light yellowish to light pinkish white. As it dries, the surface turns orange or brownish, and dry wood ranges from light yellowish to reddish brown. The wood dries quickly and rarely cracks or warps (bows or twists). Its dimensional stability (the ability to keep its dimensions as moisture changes) is satisfactory to good. Alder wood tends to turn brown both in long air drying outdoors and in kiln drying.
In the LatvijasKoks.lv catalogue, black alder sauna cladding boards cost 18 EUR/m² and black alder bench boards 20 EUR/m². Of the three species, only black alder has a separate bench board offer in the catalogue, so black alder can be used for both the wall cladding and the benches.
Linden
GD Holz describes linden wood as white to yellowish, sometimes with a pinkish or light brown tint. It has a very uniform structure and a fine texture, and the dry wood has no characteristic smell.
Linden has a low density, but it shrinks and swells quite a lot as moisture changes, and its dimensional stability is medium. As it dries, linden develops cracks and stains fairly easily. GD Holz recommends fixing linden with iron-free nails and screws, because in damp conditions iron stains the wood and the fasteners corrode heavily.
In the catalogue, linden sauna cladding boards cost 22 EUR/m². They are 18-30 mm thick, 75-200 mm wide and 1-6 m long.
Aspen
GD Holz describes aspen wood as evenly yellowish white. It warps and cracks little in both air drying and kiln drying, and its dimensional stability is satisfactory to good. Aspen and poplar wood are also used in sauna building.
When aspen is machined, the wood dust can irritate the skin of sensitive people. In the catalogue, aspen sauna cladding boards cost 20 EUR/m², and their sizes are the same as for linden boards.

Natural durability and care
The EN 350 standard rates the natural durability of wood against wood-destroying fungi. Black alder, linden and aspen are placed in class 5, which means their wood is not durable. That is why good ventilation matters in a sauna, so that the wood dries after every use.
The Finnish Sauna Society's magazine Sauna advises against building benches completely solid and tight against the back wall. Air and steam can then flow behind the benches, and the benches dry after each session. The author of the article usually recommends only a protective treatment with paraffin oil for benches rather than other surface finishes.
Cladding boards with a deep tongue and groove
The tongue is a lengthwise ridge on one edge of a board that fits into the groove on the edge of the next board. For saunas, LatvijasKoks.lv recommends cladding boards with a large, deep tongue and groove. In a sauna the wood both dries out and takes up moisture, so it shrinks and swells. A deep tongue and groove covers the gaps between the boards even when the wood has shrunk.
The catalogue also has bench boards with rounded edges. On order, LatvijasKoks.lv can make another profile (the cross-section shape of the board) with a specially prepared cutter knife.

How many boards a steam room needs
The amount of cladding is calculated in square metres. The wall area is the room perimeter multiplied by the wall height. The ceiling area is added to it, and the area of the door and window can be subtracted.
For example, in the 3 x 9 m garden sauna offered in the catalogue, the steam room measures 2 x 3 m. If the walls are 2.2 m high, the wall area is 22 m² and the ceiling area 6 m². Together that makes 28 m² without subtracting the door and window.
| Wood species | Price per m² | Price for 28 m² |
|---|---|---|
| Black alder | 18 EUR/m² | 504 EUR |
| Aspen | 20 EUR/m² | 560 EUR |
| Linden | 22 EUR/m² | 616 EUR |
The exact amount depends on the board profile and width, so it is calculated in the quotation.
The Finnish Sauna Society's magazine recommends planning a seat 600 mm wide and 600 mm deep on the benches for each adult. In home saunas, benches are usually 1800-2400 mm long, and a two-metre bench is also long enough to lie down on.
Which wood to choose
- Black alder suits a warmer finish in a yellowish brown or reddish brown tone. It can be used for both the wall cladding and the benches, since the catalogue also has black alder bench boards.
- Linden suits a light and very uniform finish. It is fixed with iron-free nails and screws.
- Aspen suits a light, even finish that warps little as it dries.
The species can also be combined, for example one wood for the walls and another for the benches. For exterior cladding, LatvijasKoks.lv recommends spruce or pine, and these cladding boards cost 15 EUR/m².
Frequently asked questions
Which wood suits sauna benches better, black alder, linden or aspen?
All three species are light and of similar density, so in a sauna they do not feel as hot to the touch as dense wood. For benches, LatvijasKoks.lv recommends black alder, aspen and linden. Black alder is slightly denser and darker, aspen and linden are lighter. In the catalogue, black alder bench boards cost 20 EUR/m².
How much do sauna cladding boards cost?
In the LatvijasKoks.lv catalogue, black alder sauna cladding boards cost 18 EUR/m², aspen 20 EUR/m² and linden 22 EUR/m². Black alder bench boards cost 20 EUR/m².
How many cladding boards does a sauna need?
The wall area is the room perimeter multiplied by the wall height, plus the ceiling area. A 2 x 3 m steam room with 2.2 m high walls needs about 28 m² of boards without subtracting the door and window.
Do sauna benches need treatment?
In the Finnish Sauna Society's magazine Sauna, the author usually recommends only a protective treatment with paraffin oil for benches. It matters more that air can flow behind the benches and that they dry after each sauna session.
Why are iron-free fasteners used for linden boards?
The GD Holz wood description states that linden wood changes colour in contact with iron in damp conditions and the fasteners corrode heavily. That is why iron-free nails and screws are recommended for linden.
Can sauna boards be delivered and cut to size?
Yes. The catalogue states that cladding boards can be cut to the required size, delivered and bought together with screws and nails. LatvijasKoks.lv also makes garden saunas in which black alder, linden or aspen can be chosen for the steam room cladding.
How to order
A quotation needs the steam room dimensions, the preferred wood species, the board thickness and width, and the delivery address. LatvijasKoks.lv prepares cladding and bench boards and also makes garden saunas.
Call +371 29 828 152, message us on WhatsApp or email info@latvijaskoks.lv.
Related pages
- Cladding boards and sauna bench boards
- Garden houses and saunas
- Garden house prices
- Terrace board prices
- Contact
Sources
- LatvijasKoks.lv, cladding boards (prices per m², sizes, profiles, deep tongue and groove, recommended species for saunas and exterior cladding, cutting, painting and delivery), latvijaskoks.lv/apdaresdeli/, viewed on 21 November 2026.
- LatvijasKoks.lv, garden houses and saunas (3 x 9 m garden sauna with a 2 x 3 m steam room, cladding of black alder, linden or aspen), latvijaskoks.lv/pirtinu-katalogs/, viewed on 21 November 2026.
- Gesamtverband Deutscher Holzhandel (GD Holz), Merkblattreihe Holzarten, sheet 086 "Erlenhölzer" (September 2020), gdholz.net, viewed on 21 November 2026.
- Gesamtverband Deutscher Holzhandel (GD Holz), Merkblattreihe Holzarten, sheet 140 "Linde" (September 2017), gdholz.net, viewed on 21 November 2026.
- Gesamtverband Deutscher Holzhandel (GD Holz), Merkblattreihe Holzarten, sheet 149 "Pappel, Aspe" (September 2020), gdholz.net, viewed on 21 November 2026.
- U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, Wood Handbook (FPL-GTR-282, 2021), chapter 4 "Moisture Relations and Physical Properties of Wood", research.fs.usda.gov/treesearch/62243, viewed on 21 November 2026.
- Suomen Saunaseura, Sauna magazine, L. A. Liikkanen, article on planning sauna benches "Lauteiden suunnittelu" (9 February 2023), sauna.fi, viewed on 21 November 2026.
